BMW GROUP ETEND SON RESEAU DE PRODUCTION E-DRIVE : LANCEMENT DE LA PRODUCTION DE COMPOSANTS DE BATTERIES A LEIPZIG ET A REGENSBURG.

BMW Group produit à présent des batteries haute tension et des composants de batteries sur seulement trois sites en Allemagne : Dingolfing, Leipzig et Regensburg +++ Moins d’un an entre la prise de décision et le début de la production à Leipzig et Regensburg +++ Production de composants de batteries pour la cinquième génération de véhicules 100% électriques de BMW Group.

BMW Group now producing high-voltage batteries and
battery components at three locations in Germany alone:
Dingolfing, Leipzig and Regensburg
Less than a year from decision to start of production in
Leipzig and Regensburg
Production of battery components for BMW Group’s fifth generation of fully-electric vehicles

Munich/Leipzig/Regensburg. The BMW Group is launching production of battery components at its plants in Leipzig and Regensburg and expanding its e-drive production network. It has been less than a year since the decision was made to expand production capacity for e-drives in Germany. BMW Group Plant Leipzig will launch series production of battery modules on Monday, 3 May 2021, while BMW Group Plant Regensburg began coating battery cells for high-voltage batteries in April 2021. High-voltage batteries will also be produced in Regensburg from 2022. “We expect at least 50 percent of the vehicles we deliver to our customers worldwide to be fully electric by 2030,” said Michael Nikolaides, Senior Vice President Production Engines and E-Drives. “And we are systematically expanding our production network for electric drive trains in response to this.”

The company is investing more than 250 million euros in its Regensburg and Leipzig locations alone to supply the BMW Group’s growing number of electrified vehicles with high-voltage batteries. High-voltage battery components will be used in production of the BMW iX* and BMW i4, both of which will be released onto the market shortly. The production systems are highly flexible and will also supply battery components for other BMW Group electrified vehicles in the future.

“We are increasing capacity at existing locations and developing capabilities at others. In this way, we can make the most of our associates’ expertise and experience and offer them long-term, secure jobs,” Nikolaides added. The BMW Group is investing a total of around 790 million euros in expanding production capacity for drivetrain components for electrified vehicles at its Dingolfing, Leipzig, Regensburg and Steyr locations between 2020 and 2022.

Production of battery modules at BMW Group Plant Leipzig

Leipzig is the BMW Group’s pioneer plant for electromobility and has been building the BMW Group’s first fully-electric vehicle, the BMW i3*, since 2013. Now, the location will also produce electric drivetrain components.

“We are continuing on this track with the launch of battery module production and further enhancing the plant’s future viability for electromobility,” confirmed Hans-Peter Kemser, Plant Director of BMW Group Plant Leipzig. “Plant Leipzig will play an important role in supplying the growing number of BMW Group electrified vehicles with battery components.” The successor to the MINI Countryman, scheduled to come off the production line in Leipzig from 2023, will be released onto the market with an electric drive train. “The expertise and experience gained by staff at our location over the years can be put to good use. Construction of the battery module lines will make a major contribution to long-term job security,” emphasised Kemser.

From May 2021, the 10,000 sq. m. production area previously reserved for the BMW i8 will be used for manufacturing battery modules. Production will get underway with 80 employees working in battery module production; by the end of the year, there will be a staff of around 150. The company will invest more than 100 million euros in the initial phase of battery module production at the Leipzig location between 2020 and 2022.

However, the production line for battery modules that just ramped up is only the beginning: The company has already decided to further increase capacity for battery module production at its Leipzig location. A second production line will come on stream in 2022. This will ensure the company has sufficient volumes to meet growing demand for drivetrains.

Production of battery components and high-voltage batteries at BMW Group Plant Regensburg

BMW Group Plant Regensburg already produces two electrified models – plug-in hybrid variants of the BMW X1* and BMW X2* – and will start building the fully-electric BMW X1 in 2022. The site’s e-mobility expertise and experience will now also be used in production of battery components and high-voltage batteries.

The first of four coating lines for fifth-generation battery cells went on stream in April 2021, occupying a production and logistics area of more than 40,000 sq. m. “Regensburg has made a successful start to production of electric drivetrain components – this is an important milestone in our transformation,” according to Frank Bachmann, Plant Director of BMW Group Plant Regensburg. The three other systems will ramp up in stages between now and the end of 2021 to supply the growing volumes needed for the BMW Group’s fully electric vehicles. Up until now, battery cells have been coated at BMW Group Plant Dingolfing and the BMW Brilliance Automotive Plant Powertrain in Shenyang, China.

Coating increases the battery cell’s mechanical robustness and thermal conductivity. This helps improve insulation and cooling of the fifth-generation e-drive’s even more powerful battery cells. From 2022, the plant in Regensburg will produce high-voltage batteries from battery modules. A total of 100 employees already work in battery component production at the Regensburg site; by the end of 2022, there will be more than 300. The company will invest more than 150 million euros in ramping up production of battery components and high-voltage batteries between 2020 and 2022.

Holistic approach to sustainability

The BMW Group has a clear mission to ensure the “greenest electric vehicle comes from the BMW Group”, starting in production. The BMW Group already sources only green power for its manufacturing locations worldwide.

The BMW Group’s energy goals are geared towards the long term. The company reduced its emissions per vehicle produced by more than 70 percent between 2019 and 2006.The aim is to lower these CO2 emissions by another 80 percent by 2030. This means the BMW Group will have reduced its CO2 emissions from production to less than ten percent of what they were in 2006.

A further corporate objective is to reduce CO2 emissions in the supplier network by 20 percent by 2030. At the same time, the BMW Group has reached an agreement with its suppliers that they will only use renewable green power for producing fifth-generation battery cells.

From battery cell to high-voltage battery

Production of high-voltage batteries can be broken down into two stages: Battery modules are produced in a highly automated process. The lithium-ion cells first undergo a plasma cleaning, before a specially developed system coats the cells to ensure optimal insulation. Next, the battery cells are assembled into a larger unit, the so-called battery module. The BMW Group obtains its battery cells from partners who produce them to the company’s exact specifications. The BMW Group uses different battery cells, depending on which provides the best properties for each vehicle concept.

The battery modules are then installed in an aluminium housing, together with the connections to the vehicle, and the control and cooling units. The size and shape of the aluminium housing and the number of battery modules used differ according to the vehicle variant. This ensures the high-voltage battery is optimally adjusted to the vehicle.

Global e-drive production network focused in Germany

The high-voltage batteries and battery components needed for all BMW and MINI electrified vehicles come from the company’s own battery factories in Dingolfing, Leipzig and Regensburg in Germany, as well as from Spartanburg (USA) and Shenyang (China). The BMW Group has also localised production of high-voltage batteries in Thailand, at its Rayong plant, and is working with the Dräxlmaier Group for this. Munich is home to the e-drive pilot plant and the Battery Cell Competence Centre, where the BMW Group is conducting a full analysis of battery cell value creation processes and refining technology for its production processes.

The company produces electric motors at the Competence Centre for E-Drive Production in Dingolfing and at BMW Group Plant Landshut. BMW Group Plant Steyr builds the housing for the highly integrated fifth-generation e-drive.

With the BMW Group’s electro-offensive now in full swing, increased production capacity is needed for electric drivetrain components. Thanks to intelligent vehicle architectures and a highly flexible production network, the BMW Group will have about a dozen fully-electric models on the roads from 2023. The BMW i3*, MINI Cooper SE* and BMW iX3* already on the market will be joined later this year by the BMW iX* and BMW i4. Between now and 2025, the BMW Group will increase its sales of fully-electric models by an average of well over 50 percent per year – more than ten times the number of units sold in 2020. By the end of 2025, the company will have delivered a total of around two million fully-electric vehicles to customers. Based on current market forecasts, the BMW Group expects at least 50 percent of its global sales to come from fully-electric vehicles in 2030. In total, over the next ten years or so, the company will release about ten million fully-electric vehicles onto the roads.

This means the BMW Group is strategically on track to reach the European Union’s ambitious CO2 reduction targets for 2025 and 2030 as well.